SISTEMI ZA UPRAVLJANJE RAZSVETLJAVE IN SENČIL

LPC-2.MC8 | PLC main control module

• 4 kb Flash memory available for parameter storage
• Ethernet connectivity with Modbus TCP slave (server) functionality
• USB port for Debugging, Application and Default parameters transfer
• Two CAN ports – one for master, one for slave
• Smarteh bus for Smarteh intelligent peripheral modules (thermostat, RFID, IR, operator terminal,..)
• Integrated RTC with Super Cap backup
• 32 kB non-volatile memory
• Mains power supplied
• Standard DIN EN50022-35 rail mounting

LPC-2.MC9 | PLC main control module

• Real Time Linux OS ARM based main module
• Ethernet connectivity with Modbus TCP/IP Slave (server) and/or Master (client) functionality
• USB port for Debugging and application transfer
• Two CAN ports – one for master, one for slave
• Smarteh bus for Smarteh intelligent peripheral modules (thermostat, RFID, IR, operator terminal,..)
• RTC and 512 kB non-volatile memory with super capacitor for needed energy storage
• BACnet IP (B-ASC), web server and SSL
• Mains power supplied
• Modbus RTU Master or Slave
• Standard DIN EN50022-35 rail mounting

LPC-2.EO1 | EnOcean wireless module

• EnOcean transceiver module based on EnOcean TCM320 module with integrated whip antenna
• Up to 5 receiver and 5 transmitter EnOcean devices supported
• 868 MHz or 315 MHz EnOcean radio standard1
• Typical working range inside buildings is up to 30m
• Standard DIN EN50022-35 rail mounting

LPC-2.DL1 | DALI/DSI module

• Standard DALI/DSI master and power supply
• Connection up to 64 slave devices
• Standard DIN EN50022-35 rail mounting

LPC-2.DL2 | DALI-2 module

• Standard DALI-2, DALI or DSI master and power supply
• Master, multi-master or slave mode
• Connection up to 64 slave devices
• Standard DIN EN50022-35 rail mounting

LPC-2.DI2 | 1DI Digital input module 230 V AC

• 1 direct 230 V AC digital input, galvanic isolated
• Flexible input for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DI5 | 8DI digital input module volt-free

• 8 standard digital inputs, galvanic isolated
• Flexible input for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.I16 | 16DI digital input module volt-free or 24 V DC

• 16 voltage free or standard digital inputs, galvanic isolated
• Flexible inputs for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DI3 | 1DI digital input module 24 V DC

• 1 standard digital input, galvanic isolated
• Flexible input for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DI6 | 8DI digital input module 24 V DC

• 8 external 24 V DC digital inputs, galvanic isolated
• Flexible input for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DI4 | 1DI digital input module 24 V AC

• 1 standard digital input, galvanic isolated
• Flexible input for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DI7 | 8DI digital inputs module 24 V AC

• 8 external 24 V AC digital inputs, galvanic isolated
• Flexible input for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DI2 | 1DI Digital input module 230 V AC

• 1 direct 230 V AC digital input, galvanic isolated
• Flexible input for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DI8 | 8DI digital input module 230 V AC

• 8 direct 230 V AC digital inputs, galvanic isolated
• Flexible input for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DO2 | 1DO (NO) relay output module

• 1 relay digital output with make contacts (NO), galvanic isolated
• Flexible output for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DO3 | 1DO (NC) relay output module

• 1 relay digital output with brake contacts (NC), galvanic isolated
• Flexible output for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DO6 | 8DO (NO) relay output module

• 8 relay digital outputs with make contacts (NO), galvanic isolated
• Flexible output for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DO8 | 8DO (NC) relay output module

• 8 relay digital outputs with break contacts (NC), galvanic isolated
• Flexible output for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DO1 | 1DO 24 V DC transistor output module

• 1 standard transistor digital output, current limited, galvanic isolated
• Flexible output for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.O16 | 16DO 24 V DC transistor output module

• 16 standard transistor digital outputs, current limited, galvanic isolated
• Flexible output for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.DO4 | 1DO 24 .. 230 V AC triac output module

• 1 snubberless zero crossing triac output, galvanic isolated
• Long life AC digital output
• Standard DIN EN50022-35 rail mounting

LPC-2.DO9 | 4DO 24 .. 230 V AC triac output module

• 4 snubberless zero crossing triac outputs, galvanic isolated
• Long life AC digital output
• Standard DIN EN50022-35 rail mounting

LPC-2.DO7 | 8DO 24 .. 230 V AC triac output module

• 8 snubberless zero crossing triac outputs, galvanic isolated
• Long life AC digital output
• Standard DIN EN50022-35 rail mounting

LPC-2.A01 | 6AI 2AO analog input output module

• 2 analog outputs voltage / current
• 6 analog inputs voltage / current
• Standard DIN EN50022-35 rail mounting

LPC-2.A03 | 2AO analog output module

• 2 analog outputs voltage / current
• Standard DIN EN50022-35 rail mounting

LPC-2.A04 | 8AO analog output module

• 8 analog outputs voltage / current
• Standard DIN EN50022-35 rail mounting

LPC-2.DD4 | 4 channel MOSFET dimmer module

• 4 channel MOSFET dimmer drive for dimmable lights or AC motor fans.
• Operational power supply 90 .. 264 V AC, 50/60 Hz or 11.5 .. 30 V DC.
• Overload protected
• SW adjustable trailing-edge or leading-edge dimmer type, separately for each one of 4 channels.
• SW adjustable fade-in and fade-out time effect, separately for each one of 4 channels.
• Phase dependent driver for output which makes this module a lot more resistant to electrical disturbances than commonly used amplitude dependent drivers.
• Standard DIN EN50022-35 rail mounting

LPC-2.PW1 | 4 Channel PWM Signal Output module

• 4 channel PWM signal output
• Galvanic isolated outputs
• 100 mA per output with overload protection
• Push-pull transistor outputs capable of driving the signal over up to 100 nF capacitance on the lines.
• Adjustable transition time (fade effect) between various output settings
• Status LEDs
• Standard DIN EN50022-35 rail mounting

LPC-2.R01 | 7DO 6DI room module

• 7 triac outputs
• Electrical door lock output
• 6 voltage free digital inputs
• Galvanic isolated
• Flexible inputs for wide use of operation
• Standard DIN EN50022-35 rail mounting

LPC-2.R02 | 4DO 3DI 4AO 2AI room module

• 4 analog outputs, where Q2 and Q4 may also be used for GND connection (jumper selectable)
• 2 analog inputs, where I2 input may also be used for NTC or GND connection (jumper selectable)
• Analog input voltage range: 0 .. 10 V @ ±1 % measurement error of full scale
• Analog output voltage output range: 0 .. 10 V @ ±1 % accuracy of full scale value
• Tacho input
• 3 voltage free digital inputs, galvanic isolated
• Flexible digital input for wide use of operation
• 3 snubberless zero crossing triacs output also suitable for use with inductive loads up to 0.9 A
• 1 snubberless zero crossing triac output also suitable for use with inductive loads up to 3.5 A, with load test function
• 24 V AC/DC power supply output with overload protection
• Standard DIN EN50022-35 rail mounting

LPC-2.DT3 | LCD Room thermostat (T, 3-speed fan), access control reader & key card holder RFID Mifare, 8 gang touch switch

• Frameless glass screen with LCD
• 8 capacitive touch buttons
• 8 blue LED, one on each touch button
• 8 rectangular symbols to show on/off status on the LCD
• Integrated ISO/IEC 14443 A/MIFARE RFID UID reader
• Possibility to use as card access or card holder – supplied with two different plastic covers for RFID slot
• Integrated temperature and light sensor
• LCD intensity control
• Color LCD with possibility of background picture changing and status symbols size changing
• Buzzer for touch beep signalization or other signalization which is controlled from PLC program
• Available in black or white colour finish
• Flush mount or screw mount

LPC-2.IR2V | IR multisensor (T/RH, IR, lux)

• Room temperature and relative humidity measurement
• Lux sensor for light intensity measurement
• IR receive/transmit
• Programmable IR transceiver
• RC-5 IR protocol receiver
• Daikin, Toshiba, Hitachi, Panasonic, Mitsubishi, LG IR protocol transmitter
• Flush mount

LPC-2.RC1S | IR remote control

• IR command transmitter
• Robust design
• Designed for building automation

LPC-2.DT1B | LCD 4 gang push button switch

• 4 push buttons to switch light on/off
• 4 light symbols to show lights on/off status
• Temperature measurement
• LCD intensity control
• Color LCD display with background picture customization possibility
• Available in black or white colour finish
• Flush mount

LPC-2.DT2 | LCD 8 gang touch switch

• 8 capacitive touch buttons
• 8 blue LED, one on each touch button
• 8 rectangular symbols to show on/off status on the LCD
• LCD intensity control
• Color LCD with possibility of background picture changing and status symbols size changing
• Buzzer for touch beep signalization or other signalization which is controlled from PLC program
• Available in black or white colour finish
• Flush mount or screw mount

LPC-2.SM5 | Multisensor (IR, lux, PIR, CO2)

• CO2 sensor for CO2 measurement
• PIR sensor for occupancy detection
• Lux sensor for light intensity measurement
• IR receive/transmit
• Mounting with integrated magnets or screws

LPC-2.SM6 | Multisensor (IR, lux, PIR, VOC)

• VOC sensor for VOC measurement
• PIR sensor for occupancy detection
• Lux sensor for light intensity measurement
• IR receive/transmit
• Mounting with integrated magnets or screws

LPC-2.SM7 | Multisensor (IR, lux, T)

• IR matrix sensor for temperature measurement
• Lux sensor for light intensity measurement
• IR receive/transmit
• Mounting with integrated magnets or screws

LPC-3.GOT.001 | 7`` LCD PLC HMI touch screen, resistive

• Aluminium frame with 7” LCD display and resistive touch screen
  – landscape or portrait orientation
• Graphical interface is freely designed by the user with GUI editor in SmartehIDE
• Ethernet connectivity with Modbus TCP/IP Slave (server) and/or Master (client) functionality,
  BACnet IP (B-ASC), web server and SSL
• Modbus RTU Master or Slave
• USB port for Debugging and application transfer
• Remote access and application transfer
• 2 galvanic isolated (2500 V DC) CAN port – one for master, one for slave
• RTC and 512 kB NV RAM with super capacitor for needed energy storage
• Micro SD Card slot
• Display brightness level controlled from PLC program
• Flush mount

LPC-3.GOT.011 | 7`` LCD PLC HMI touch screen, capacitive

• Frameless glass screen with 7” LCD display and capacitive touch screen
  – landscape or portrait orientation
• Graphical interface is freely designed by the user with GUI editor in SmartehIDE
• Ethernet connectivity with Modbus TCP/IP Slave (server) and/or Master (client) functionality,
  BACnet IP (B-ASC), web server and SSL
• Modbus RTU Master or Slave
• USB port for Debugging and application transfer
• Remote access and application transfer
• 2 galvanic isolated (2500 V DC) CAN port – one for master, one for slave
• RTC and 512 kB NV RAM with super capacitor for needed energy storage
• Micro SD Card slot
• Display brightness level controlled from PLC program
• Available in black or white colour finish
• Flush mount

LPC-3.GOT.012 | 7`` LCD PLC HMI touch screen, capacitive

• Frameless glass screen with 7” LCD display and capacitive touch screen – landscape or portrait orientation
• Graphical interface is freely designed by the user with GUI editor in SmartehIDE (Inkscape)
• Ethernet (10/100/1000T) connectivity with Modbus TCP/IP Slave (server) and/or Master (client) functionality,
  BACnet IP (B-ASC), web server and SSL
• Modbus RTU Master or Slave
• Smarteh bus
• USB port for Debugging and application transfer
• Remote access and application transfer
• 2 galvanic isolated (2500 V DC) CAN port – one for master, one for slave
• RTC and 512 kB NV RAM with super capacitor for needed energy storage
• Micro SD Card slot
• Display brightness level controlled from PLC program
• Flush mount
• Available in black or white colour finish
• RAM: 512 MB DDR3
• Flash: 4GB
• CPU: iMX6 1GHz

LPC-3.GOT.111 | 4.3`` LCD PLC HMI touch screen, capacitive, temperature

• Frameless glass screen with 4.3” LCD display and capacitive touch screen
  – landscape or portrait orientation
• Graphical interface is freely designed by the user with GUI editor in SmartehIDE
• Integrated temperature and light sensor
• Ethernet connectivity with Modbus TCP/IP Slave (server) and/or Master (client) functionality,
  BACnet IP (B-ASC), web server and SSL
• Modbus RTU Master or Slave
• USB port for Debugging and application transfer
• Remote access and application transfer
• Two CAN ports – one for master, one for slave
• RTC and 512 kB NV RAM with super capacitor for needed energy storage
• Display brightness level controlled from PLC program
• Available in black or white colour finish
• Flush mount or screw mount

LPC-3.GOT.131 | 4.3`` LCD PLC HMI touch screen, capacitive, temperature, RFID Mifare

• Frameless glass screen with 4.3” LCD display with capacitive touch screen
  – landscape or portrait orientation
• Graphical interface is freely designed by the user with GUI editor in SmartehIDE
• Integrated ISO/IEC 14443 A/MIFARE RFID UID reader
• Mifare Classic 1K, 2K, 4K NDEF reader and writer
• Integrated temperature and light sensor
• Possibility to use as card access or card holder – supplied with two different plastic covers for RFID slot
• Ethernet connectivity with Modbus TCP/IP Slave (server) and/or Master (client) functionality,
  BACnet IP (B-ASC), web server and SSL
• Modbus RTU Master or Slave
• USB port for Debugging and application transfer
• Remote access and application transfer
• Two CAN ports – one for master, one for slave
• RTC and 512 kB NV RAM with super capacitor for needed energy storage
• Display brightness level controlled from PLC program
• Available in black or white colour finish
• Flush mount or screw mount

LTS-2.PC3 | 7`` LCD PC HMI touch screen, capacitive, CE6.0

• Aluminium frame with 7” LCD display and resistive touch screen
  – landscape orientation
• Operating system Windows CE 6.0
• Processor Samsung S5PV210 @ 1 GHz
• Memory 512M RAM on board
• Storage micro SD card slot 4 GB SD card included
• Display 800 x 480 pixels, 64 k Color, LCD display size 154 x 92 mm
• Keyboard on screen (USB keyboard and USB mouse supported)
• Connection to process 1 x Ethernet, 1 x RS-232, 2 x RS-485
• Power supply 5.2 V DC, 1.2A external power supply
• Programming Movicon CE preinstalled
• OS downloading USB, RS-232, SD CARD
• Application download to SD card using card reader, USB
• Flush mount

Interconnection cable SSK

Interconnection cable ICM-7

Splitter SPL-1 (1/2)

Splitter SPL-2 (1/8)

Splitter SPL-5

LOC-1 | Occupancy sensor

• Wide power supply range 5 .. 32 V DC/AC
• Output voltage free contact
• Mounting with integrated magnets or screws
• Convenient enclosure for multi mounting possibilities
• 2 diagnose LED

LOC-2 | Occupancy sensor

• Wide voltage operating range 10 .. 32 V DC
• Two flying lead wires connection
• Mounting with integrated magnets or screws
• Convenient enclosure for multi mounting possibilities
• 1 diagnose LED

GM2 | GSM commander

APS-1 | Adjustable power supply 5V2

APS-04 | Adjustable power supply 24V 60W

LSA-2.USB | USB RS-232/RS-485 adapter

• Optically isolated RS-232 and RS-485 ports
• Speeds up 115 kbps
• Galvanic isolated power supply
• Diagnose LEDs
• Small compact enclosure