NEW LBT-1.DO4 Bluetooth Mesh Triac output module 2DO (1A) 1DI
22. 2. 2024
LBT-1.DO4 Bluetooth Mesh two triac output module is designed to be used as a shades or curtains motor control module with RMS current and voltage measuring possibility. The module can operate with a wide range of AC voltages. It can be placed inside the 60mm diameter flush mounting box. It can also be placed close to shades or curtains motor. Switch input is provided to have the possibility of manually switching On and Off the two triac outputs. This input can detect 50/60 HZ for triac 1 control and 25/30 HZ for triac 2 control. Two positions push button switch with an appropriate diode as 1N4007 should be connected to the switch input line wire as shown in Figure 4. Only one triac output, triac output 1 or triac output 2, can operate at the time.
LBT-1.DO4 Bluetooth Mesh two triac output module can only operate with Smarteh LBT-1.GWx Modbus RTU Bluetooth Mesh gateway connected to the same Bluetooth Mesh network. LBT-1.GWx Modbus RTU gateway is connected to the main control device as Smarteh LPC-3.GOT.012 7″ PLC based Touch panel, any other PLC or any PC with Modbus RTU communication. Besides Smarteh Bluetooth Mesh devices, other standard Bluetooth Mesh devices can be integrated into above mentioned Bluetooth Mesh network. More than a hundred Bluetooth Mesh devices can be provisioned and can operate in a single Bluetooth Mesh network.
LBT-1.DO4 user manual:
https://www.smarteh.com/wp-content/uploads/2022/07/245do421001001_lbt1_do4_usrman.pdf
LBT-1 Bluetooth Mesh solution presentation:
https://www.smarteh.com/wp-content/uploads/2020/12/smarteh-lbt-1-bluetooth-mesh-solution.pdf
LBT-1 Bluetooth Mesh video presentation:
https://youtu.be/GH7MFFOPVN4
LBT-1 Bluetooth products overview:
https://www.smarteh.com/products/building-automation-product-line/lbt-1-bluetooth-products/
We welcome your inquiries at sales@smarteh.si